. . . . rf saw filter part number package application last modified 802-rf481.2m-a 3.0 x 3.0 smd cdma450(f-band) mar. 2, 2007 type : cdma450, rf-tx saw filter part number : 802-rf481.2m-a operating conditions / el ectrical characteristics parameters condition minimum typical maximum units center frequency (fo) - - 481.2 - mhz maximum insertion loss 479.0~ 483.5 mhz - 2.0 3.2 db stop band attenuation: 0.3~ 467.0 mhz 25 28 - db 489.0~ 493.5 mhz 30 50 - 493.5~ 1700.0mhz 23 27 - 1700.0~ 2000.0 mhz 15 22 - source impedence (single ended)* - - 50 - ohm load impendance (single ended)* - - 50 - ohm vswr 479.0~ 483.5 mhz - 1.3 2.0 - maximum input power - - - 30 dbm operating temperature - -30 - +80 oc * no matching network package outline (mm) pin layout a ground b out c ground d ground e in f ground test fixture source/ load impedance = 50 ohms frequency response pa g e 1 of 2 oscilent cor p oration rf saw filter | 802-rf481.2m-a
crystal oscillators | quartz crystal | tcxo | vcxo | if saw filter | rf saw filter | ceramic resonator crystal filter | ceramic filter | saw filter / saw devices | site map vswr smith chart part no.: 802-rf481.2m-a pa g e 2 of 2 oscilent cor p oration rf saw filter | 802-rf481.2m-a
|